3 Narang Place,

St Marys NSW 2760 Australia

Ph +61 2 9833 4474

print this page              

FOAM TYPE FIRE EXTINGUISHER

If you're confronted with a fire, you need to be confident that your extinguisher is manufactured to the highest level of quality.

EVERSAFE Foam Extinguishers are assembled in Australia under an accredited ISO 9001 Quality Management System and are approved to AS/NZS 1841.

Foam Extinguishers are specifically designed and effective for use on Class B fires involving flammable and combustible

liquids such as petrol, oil and some paints and can also be used to blanket a spill to prevent ignition. They are also suitable for Class A fires involving paper, timber, cardboard and some plastics. Because of its conductivity, Foam must not be used where live electrical current is present.

With a wide range of sizes and equipment types available, there is an EVERSAFE Extinguisher to suit practically every fire risk in the home, car, caravan or boat to the largest commercial and industrial property.

MODEL

EAF-Q

CAPACITY

9.0 LITRE

 FOAM CHARGE

TYPE '916' 6% AFFF - 540ml
 VALVE CONTROLLABLE BRASS VALVE WITH PRESSURE INDICATOR

CYLINDER SPECIFICATION

304 GRADE STAINLESS STEEL

BODY DIAMETER

185 mm

OVERALL HEIGHT

650 mm

APPROX. FULL MASS

12.0 KG

WORKING PRESSURE

700 kPa @ 23+/- 2°C

TEST PRESSURE

2.0 Mpa

DISCHARGE TYPE

DISCHARGE HOSE and AERATING NOZZLE

APPROX. DISCHARGE TIME (sec)

60 seconds

RRE RATING - 'STILL AIR'

3A20B
 PAINT FINISH/COLOUR BAND POWDER COAT - SIGNAL RED (R13)/BLUE BAND

MOUNTING

WALL TYPE BRACKET

 

STABILITY GUIDE

CLASS A

PAPER ETC

CLASS B

FLAM. LIQUID

CLASS C

FLAM GAS

CLASS E

ELECTRICAL

CLASS F

COOKING OIL

YES

YES NO NO LIMITED