3 Narang Place,

St Marys NSW 2760 Australia

Ph +61 2 9833 4474

print this page              

DRY POWDER FIRE EXTINGUISHER

If you're confronted with a fire, you need to be confident that your extinguisher is manufactured to the highest level of quality.

The EVERSAFE range of Dry Powder Fire Extinguishers have been manufactured under an accredited ISO 9001 Quality Management System and are approved to AS/NZS 1841.

Charged with ABE type powder are the most suitable and effective

extinguisher type for use on fires involving  paper, timber, textiles and most plastics as well as flammable and combustible liquids.

The powder stream is non-conductive so it is also safe to use in areas where live electrical current may be present.

With a wide range of sizes and equipment types available, there is an EVERSAFE extinguisher to suit practically every fire risk in the home, car, caravan or boat to the largest commercial and industrial property.

MODEL

EAD-1s

EAD-1sh

EAD-2sh

EAD -25s

EAD-3S

EAD-45s

EAD-6s

EAD-9s

CAPACITY

1.0 kg 1.0kg 2.0kg 2.5kg 3.0kg 4.5kg 6.0kg 9.0kg

VALVE

CONTROLLABLE BRASS VALVE WITH PRESSURE INDICATOR

BODY DIAMETER

79mm 79mm 100mm 130mm 130mm 158mm 158mm 178mm

OVERALL HEIGHT

330mm 330mm 410mm 410mm 490mm 470mm 560mm 620mm

APPROX. FULL MASS

2.2 kg 2.5 kg 4.0 kg 4.65 kg 5.75 kg 8.1 kg 10.0 kg 14.25 kg

WORKING PRESSURE

1200 kPa @ 23 +/- 2°C

TEST PRESSURE

2.5 Mpa

DISCHARGE ASSEMBLY TYPE

NOZZLE DISCHARGE HOSE and NOZZLE

APPROX. DISCHARGE (sec)

10 10 15 14 18 22 22 22

FIRE RATING - 'STILL AIR'

1A10B:E 1A10B:E 2A30B:E 2A30B:E 3A40B:E 4A40B:E 4A80B:E 6A80B:E

COATING INTERNAL

STOVING EPOXY PRIMER

PAINT FINISH/BAND COLOUR

POLYESTER POWDER COAT - SIGNAL RED (R13) / WHITE BAND

MOUNTING

VEHICLE TYPE BRACKET WALL TYPE BRACKET

 

STABILITY GUIDE

CLASS A

PAPER ETC

CLASS B

FLAM. LIQUID

CLASS C

FLAM GAS

CLASS E

ELECTRICAL

CLASS F

COOKING OIL

YES

YES YES YES NO